With the development of science and technology, many electrical appliances are now improved. Therefore, in many electrical equipment, tilt switches are used to protect electrical appliances and solve the problem directly from the root cause. Such as oil heaters, air purifiers, vertical air conditioners, electric fans, etc.
Our tilt switch A2TS-V can be used not only for household appliances, but also for physiotherapy equipment, sports equipment and other electrical appliances and equipment that require dumping protection.
1. It has strong seismic resistance in both horizontal and vertical directions
2. The installation is simple. There will not be any damage when weld.
3. High precision of action, the angle error of high and low level switching can be controlled within ±5°
4. There is no friction and oxidation problems, and the ambient temperature and humidity have no influence on the signal output voltage.
Connect the tip over switch into below circuit. The sensor will output signals to the MCU I/O port. When
detected the change of Signal Output value, MCU will release some orders to do some corresponding actions to protect the unit.
The switch can be detected by 360° full radial direction against tipping over*/
Tip over action angle is 45°±5°in every radial direction
Recover action angle is 60°±5°in every radial direction