Tilt Switch Sensor

Function: Vibration detecting/ Tilt within a 360° radius detecting,
Housing made of high insulation plastic material, free from electric conduction and rust problem.
Detecting with photo transistors, generating highly reliable and stable signals.
Conductive rate is higher, nearly 100%.
Simple ON and OFF signals, easy for design. RoHS compliance, an ideal substitute for mercury switch.
A more economical tilt and rotation detection option than IC design solution.
Do not try to clean the switch with a solvent or similar substance after the soldering process.
Examined before shipment.
Chat Now

Product Details

Product description

The working theory of tilt switch sensor A2TS-H is infrared photoelectric type.

When the switch is tilted more than a certain angle (this angle is controlled by the cone angle), the steel ball slides along the tapered wall to the opening under the action of gravity, blocking the infrared light path and cutting off the infrared receiving transistor. Then cut off the power supply of machine.

In addition, the steel balls are far away from the hole, allowing light to pass through and turning on the infrared receiving transistor. The machine works.

 

Compared with the traditional dump switch with electric shock, the advantages of A2TS-H are as follows:

1) There is no contact, there is no contact due to rust leading to poor contact.

2) The tilting angle can be customized, and it can be moved in 360 degrees without dead ends.

Disadvantages: It can only be used as a signal, and other circuits are needed to assist.


tilt switch

Accessories


peijian

Inquiry

You Might Also Like